Boss Audio Systems BR-600 - Manual (Page 19)

19
Panel Descriptions
Re
v0.10
REC/PLAY section
AUTO PUNCH
This button is used to make settings for the automatic
punch in/out function.
[ON/OFF]
This turns the auto punch-in/out function on/off. When
this is on, the button will light.
“Specifying the area for auto punching in/out”
(p. 61)
[IN]
For setting the auto punch-in location. Press this button to set
the punch-in point. When set, the button will light. After the
punch-in location is set, you can press this button to
automatically move to the punch-in location.
* Press this button while holding down [ON/OFF] to clear the
set punch-in location.
“Erasing a registered auto punch in/out
location” (p. 62)
[OUT]
For setting the auto punch-out location. Press this button to
set the punch-out location at the current location in the
track. When set, the button will light. After the punch-out
location is set, you can press this button to automatically
move to the punch-out location.
* Press this button while holding down [ON/OFF] to clear the
set punch-out location.
“Erasing a registered auto punch in/out
location” (p. 62)
[LOCATOR]
Use this button to store any location that you desire. Then, by
pressing this button, you can automatically move to that location.
When a location is set, the button will light and you will jump to
the location each time this button is pressed.
* Press this button while holding down AUTO PUNCH [ON/
OFF] to clear the set location.
“Registering Time (Locator)” (p. 72)
[ZERO]
Moves you to the time location 00:00:00-00.0.
“Moving the current position” (p. 33)
[REW]
The song will rewind while you hold down the button.
“Moving the current position” (p. 33)
[FF]
The song will fast-forward while you hold down the button.
“Moving the current position” (p. 33)
[REPEAT]
You can specify a region that you wish to hear, and hear it
repeatedly
This is convenient for making recordings involving repeated punch-
ins and punch-outs(p. 60) and for practicing and copying phrases.
“Repeating Playback (Repeat)” (p. 58)
[STOP]
Stops recording or playback of the song.
“Recording Operations” (p. 57)
[PLAY]
Plays back songs. When [REC] is pressed and flashing,
press [PLAY] to start recording. During recording or
playback, the indicator on the button lights in green.
“Listening to a Demo Song” (p. 32)
“Recording Operations” (p. 57)
[REC (Recording)]
This is the Recording button. In addition to the Recording
operation, it is also used for manual punch-in/out. While in
recording standby, the button flashes in red, and during
recording, it lights in red.
“Recording Operations” (p. 57)
“Manually Punching In/Out” (p. 60)
5