Embroidering from a specific starting point, Checking the embroidery area – Brother PC 6500 User Manual
Page 110
Embroidering from a specific starting point
1. Mark the starting point on the fabric within the frame as
shown in the illustration. The mark cannot be too close to
the edge of the frame as the presser foot prevents the
needle from getting very close to the frame.
2. Press
so that it appears as
. The embroidery
frame moves so that the needle is at the starting point.
ABC
3. Use the arrow keys to move the frame so that the mark on
the fabric aligns with the hole in embroidery foot Q, and then
start embroidering.
Checking the embroidery area
Press the TRIAL key to move the embroidery frame so that the
presser foot traces the necessary embroidery area for the
currently selected pattern.
Note
Do not lower the needle. Instead, use the hole in embroidery
foot Q as a guide.
107