Brother PC 6500 - Manual (Page 68)

1. Press the STITCH ADJUST key, and then select the eyelet
size.
2. Attach presser foot N.
3. Check that the needle drops at the desired position, lower
the presser foot lever, and then start sewing. Once sewing
is completed, the machine automatically sews reinforcement
stitches, and then stops.
1 Needle drop point
Note
If automatic thread cutting is turned on before you start sewing,
both threads are automatically cut after the reinforcement
stitches are sewn.
4. Make a hole in the center with an eyelet punch.
EYELET STITCHING
N
L M S
L (large): 9/32" (7.0 mm)
M (medium): 15/64" (6.0 mm)
S (small): 13/64" (5.0 mm)
1 Eyelet
1
Use this stitch for making eyelets, such as on belts.
(
Shown in actual size.)
65
CONTENTS
SETTING UP
SEWING
UTILITY
STITCHES
MY CUSTOM
STITCH
TM
(CREATE
YOUR
OWN
STITCH
DESIGNS)
EMBROIDERING
MAINTENANCE
ERROR
MESSAGES
SEWING CHART
PATTERNS
(PROGRAMMED
IN MACHINE)