Hemstitching with – Brother PC 6500 User Manual
Page 79
Advertising
76
Hemstitching with
1. Pull out four threads, leave an unfrayed section of five
threads, and then pull out four more threads. The width of
the five threads is approximately 5/32" (4.0 mm) or less.
1
Approx. 5/32" (4.0 mm) or less
2
Sections of four threads pulled out
3
Unfrayed section of five threads
2. Sew the decorative stitch along the center of the unfrayed
section so that the stitching appears as shown below.
Note
Use of the wing needle is optional.
Advertising