Basting – Brother PC 6500 User Manual
Page 54
Advertising
51
BASTING
1. Attach presser foot J and lower the presser foot lever.
2. Press the reverse/reinforcement button to sew
reinforcement stitches at the beginning of the basting.
Note
–
If you will not sew reinforcement stitches, raise the presser
foot lever, hold the end of the upper thread, and then turn
the balance wheel toward you with your right hand to pull up
the bobbin thread. Pull about 2" (5.0 cm) of both the upper
and lower threads out toward the rear of the machine.
–
The length of one stitch can be set between 13/64" and 1-
3/16" (5.0 and 30.0 mm).
1
Between 13/64" and 1-3/16" (5.0 and 30.0 mm)
3. Sew while keeping the fabric pulled tight.
4. End the basting with reinforcement stitches.
1
1
Basting stitch
1
J
Advertising