Combining a frame pattern with a design, Making badges or decorative patches – Brother PC 6500 User Manual

Page 122

Advertising
background image

119

CONTENTS

SETTING UP

SEWING

UTILITY

STITCHES

MY CUSTOM

STITCH

TM

(CREATE

YOUR

OWN

STITCH

DESIGNS)

EMBROIDERING

MAINTENANCE

ERROR

MESSAGES

SEWING CHART

PATTERNS

(PROGRAMMED

IN MACHINE)

Combining a frame pattern with a design

1. Create a frame pattern, and then embroider it.

A cross (+) is sewn in the center of the frame after it is
embroidered. This mark can be used as a guide for
positioning characters or other patterns within the frame.

2. Create the inner design, and then press the SET key, then

the LAYOUT key to display the layout screen.

3. Select the center needle position (Make sure the button

appears as

.

), and then adjust the embroidery pattern

position so that the hole in embroidery foot

Q aligns with “+”.

Then, embroider the design.

Making badges or decorative patches

1. After embroidering a frame and the inner design, select the

same frame pattern, press

, as the stitch, and then sew

the same frame pattern around the outside of the original

frame so that it is slightly larger than the original.

2. Cut cleanly around the outside frame, following the line of

the outside stitching.

Advertising