Brother PC 6500 User Manual
Page 94
Advertising
6. Insert the fabric and inner frame back into the outer frame
without allowing the embroidery sheet or the fabric to move
out of place.
1
Outer frame
2
Inner frame
3
Right side of fabric
Note
Press down firmly until the tops of the outer frame and inner
frame are aligned.
1
7. Tighten the screw by hand.
1
Tighten
Note
To avoid stripping the screw, do not use a screwdriver to tighten
it.
1
2
3
1
8. Check that the center of the pattern has remained in the
correct position, and then remove the embroidery sheet
before starting to embroider.
1
Fingerhole for removing embroidery sheet
91
Advertising