Toshiba Magnia 560S - Manual (Page 143)

Sarting the WebBIOS Utility on the Host Computer
WebBIOS Configuration Utility
125
NOTE: If there is a configuration mismatch between the disks and the
NVRAM (Non-volatile Random Access Memory) on the adapter, the Select
Configuration screen displays first. This screen is used to perform custom
configuration, auto configuration with redundancy (recommended), or auto
configuration without redundancy.
See Section "Configuration Wizard," for information about selecting a configuration,
and Section "Configuration Mismatch," screen for information about configuration
mismatches.
Main Screen
When you press <Ctrl> <H> on the host computer, the main screen displays. The main
screen displays a menu of items that you can select to display information and make
changes to the RAID arrays on the server. The screen also displays the current
configuration of the physical and logical drives. From this screen, you can configure
and manage the RAID arrays.
NOTE: If there are multiple adapters, WebBIOS starts from the Adapter
Selection screen.