Toshiba Magnia 560S - Manual (Page 213)

SCSI Cables and Connectors
SCSI Cables and Connectors
195
SCSI Cables and
Connectors
SCSI Connectors
RAID Controller Kit-G provides several different types of SCSI connectors. The
connectors are:
•
One 68-pin high density internal connector
•
One 68-pin very high density external connector
68-Pin High-Density SCSI Internal Connector
The SCSI channel on the RAID Controller Kit-G controller has a 68-pin high density
0.050 inch pitch unshielded connector.
This connector provides all signals needed to connect RAID Controller Kit-G to wide
SCSI devices. The following connector pinouts are provided for both single-ended and
differential primary bus (P-CABLE) as specified in the SPI (SCSI Parallel Interface)
documentation.
The cable assemblies that interface with the 68-pin connector are:
•
Flat ribbon or twisted pair cable for connecting internal wide SCSI devices
•
Round shielded cable for connecting external wide SCSI devices