Toshiba Magnia 560S - Manual (Page 151)

Logical Drives
WebBIOS Configuration Utility
133
This screen displays the physical drives for each channel. From this screen, you can
rebuild the physical drives or view the properties for the physical drives you select.
Select Rebuild or Properties and click on Go to perform these actions. Click Reset to
return to the configuration that existed before you made any changes.
Configuration Wizard
The Configuration Wizard screen displays when you select Configuration Wizard on
the MegaRAID WebBIOS main screen.
On this screen, you can begin the procedure to clear a configuration, create a new
configuration, or add a configuration. After you select one of the options, click Next to
go to step 2/5. (These step numbers appear in the lower right corner of the wizard
screens.)
Select Configuration
Step 2/5 displays on the next screen. On this screen, you can choose custom
configuration, auto configuration with redundancy (recommended), or auto
configuration without redundancy. When you have selected a configuration, click Next
to continue with step 3/5.