Toshiba Magnia 560S - Manual (Page 165)

Installing on a Workstation
Installing Power Console Plus
147
In this example, all three components are selected. The server includes the
following features:
- The server is the primary registration server of the network
- The server registers to itself so it can be monitored
- The server can monitor other RAID servers, including itself
6. Click on Next. Select the destination directory path. The default destination
directory is C: Program Files MegaRAID .
7. Set the password as prompted. Verify the password. Click on OK.
8. You are prompted to edit the REGSERV.DAT file, and HOST file. Edit
REGSERV.DAT in c: winnt system32 drivers etc using the Notepad program.
REGSERV.DAT should look something like this:
a. When editing REGSERV.DAT, replace the name "localhost" with your
Registration Server name, no matter what configuration you have selected, even
if the Registration Server is the server you are working on.
b. Press <Enter> after you type the name of the Registration Server. If you do not,
Notepad might not enter the information.