Toshiba T5445 - Manual (Page 36)

English - 36 -
English
Other Controls
Configuring Other Settings - General
You can configure the settings of your TV. Select
Settings from main menu and press OK to view the
Settings menu. Press the MENU button on the remote
control to exit.
To view general configuration preferences, select
Other Settings in the Settings menu and press OK
button.
Operation
• Press Up or Down button to select an item.
• Use Left or Right button to set an option or press
OK button to view a sub-menu.
Menu Timeout
To set a specific display timeout for menu screens,
set a value for this option.
In the Other Settings menu, select Menu Timeout
and choose 15 sec , 30 sec , 60 sec or Off using Left
or Right button.
Scan Encrypted Channels
When this setting is set as Yes , search process will
locate the encrypted channels as well. If it is set as
No manually, encrypted channels will not be located
while in automatic search or manual search. Scan
Encrypted Channel feature will always be Yes after
performing first time installation.
• In the Other Settings menu, use Up or Down button
to select Scan Encrypted Channels .
• Press Left or Right button to set this function as
Yes or No .
Hbb TV
If you set this option to On , HbbTV services such as
catch-up services, video-on-demand, EPG, games
will be available if the broadcast supports. You can
disable this feature by setting this option to Off .
Blue Background
If the signal is weak or absent, the TV will automatically
change to a blue screen. To enable this, set Blue
Background to On .
• In the Other Settings menu, select Blue
Background and choose On or Off using Left or
Right button.
Software Upgrade
This feature helps to keep your TV updated. It works
automatically and searches for new information when
available.
You can enable or disable automatic upgrade by
setting the Automatic Scanning option.
You can select the satellite, which is used for updating
process by setting Edit Upgrade for Satellite option.
You can manually start searching for new software by
selecting Scan for upgrade and pressing OK button.
Press RET/BACK or MENU button to cancel the
process.
Application Version
Displays the current software version.
Hard of Hearing
If the broadcaster enables any special signal
concerning the audio, you can set this setting as On
to receive such signals.
• Use Up or Down button to select Hard of Hearing
and then press Left or Right button to set this setting
as On or Off .