Toshiba T5445 - Manual (Page 37)

English - 37 -
English
Other Controls -
continued
Audio Description
Audio description refers to an additional narration
track for blind and visually impaired viewers of visual
media, including television and movies. The description
narrator talks through the presentation, describing
what is happening on the screen during the natural
pauses in the audio (and sometimes during dialogue,
if deemed necessary). You can use this feature, only if
the broadcaster supports that additional narration track.
• Highlight Audio Description by pressing Up or
Down button.
• Press OK button to enter Audio Description
submenu.
• Use Up or Down button to select Audio Description
setup and then press Left or Right button to set
this setting.
Auto TV Off
You can set the timeout value of auto off feature. After
the timeout value is reached and the TV is not operated
for selected time, the TV will go off. Press MENU button
and select Settings by using Left or Right button. Press
OK button to continue. Use Up or Down button to select
Other Settings and then press OK button. Select Auto
TV Off using Up or Down button.
Standby Search (optional)
If the Standby Search is set to On and the TV is in
standby mode, the TV will look for any changes in
the saved channels. Press MENU button and select
Settings by using Left or Right button. Press OK
button to continue. Use Up or Down button to select
Other Settings and then press OK button. Select
Standby Search using Up or Down button and use
Left or Right button to set.
Bisskey
Biss is a satellite signal scrambling system that is
used for some broadcasts. If you need to enter BISS
key on a broadcast, you can use Biss Key setting.
Highlight Biss Key and press OK to enter keys on the
desired broadcast.
Store Mode
If you set Store Mode to Enabled , your TV’s
features will be illustrated on the top of the screen. To
deactivate this feature, set to Disabled .
Media Renderer
This feature allows to share/play files stored in
a compatible mobile device on the TV. Install an
appropriate software on your device and read
instructions of the sharing software for more
information. Highlight Media Renderer and press
Left or Right button to enable or disable.
Power Up Mode
This setting configures the power up mode preference.
Standby: The TV always powers up in Standby mode.
Last State: The TV always switches on with the last
selected channel/source.
Virtual Remote
This function allows to control the TV via a wireless
handheld device. Enable the Virtual Remote feature
by pressing Left or Right button.
• Download a virtual remote controller application from
the server of your mobile device application provider.
• Connect the TV and the mobile device to the same
network. Refer to the Network Settings section to
make the connection properly.
This feature may not be supported on all mobile
devices.
CEC
This function allows to control the connected HDMI-
CEC compatible devices with the remote control of the
TV. Press Left or Right button to enable the feature.
Select the HDMI input of the connected device from
the source menu. The TV remote is automatically
able to control most functions of the device (navigate
menus, change channels, launch the disc etc.).
To terminate this operation and control the TV via the
remote again, press QUICK button on the remote,
highlight the CEC RC Passthrough and set as Off
by pressing Left or Right button. To control the CEC
device again set the CEC RC Passthrough option as
On. It is also possible to disable this feature in the
configuration menu of the connected HDMI device.
Refer to the operating instructions of the related
device.
CEC operation is available if a CEC device is present.
The CEC osd menu is accessed through the QUICK
button on the remote. The CEC osd menu will only be
displayed if a CEC product is connected.