Cautions and other information for 3d, English – Toshiba T5445 User Manual

Page 56

Advertising
background image

English

- 56 -

English

Cautions and Other Information for 3D

For optimal 3D effect and to avoid eye fatigue it is

important that you properly select your viewing

position.

The best viewing position is with your

eyes at the same level as the center of the display

IMPORTANT

: If you see a double image, your

eyes are either too high or too low in relation to the

horizontal center of the screen.
Adjust your position so that it is closer to the center

to

avoid eye fatigue and to enjoy optimum 3D effects.

Watching TV while sitting too close to the screen

for an extended period of time may cause eye

strain.

The ideal viewing distance should be at least

three times the screen height.

Switching left and right images.

The left and right

eye shutter timing of the glasses can be swapped.

If 3D images look blurred, switch the left and right

sides of the 3D image.

Notes on watching the TV

• 3D effect and image quality may vary depending

upon content quality and display device capability/
functionality/settings.

• If you use any device, such as a mobile phone or

mobile wireless device, near the 3D glasses, the

3D glasses may not work correctly.

• Use the product in the following temperature

range; otherwise, the quality of the 3D image or

the reliability of the product cannot be guaranteed.

3D glasses:

0 °C - 50 °C

TV:

5 °C - 35 °C (41 °F - 94 °F)

If you use a fluorescent light, it may flicker

depending on the frequency of the light. In this

case, reduce the brightness of the fluorescent

light, or use another light. (It is not recommended

to watch the TV in a dark room, especially for

children.)

Wear the 3D glasses properly, otherwise you

may not see the correct 3D image.

When not viewing 3D images on this unit, take

off the 3D glasses; otherwise, it may be difficult

to see the display on other products such as PC,

digital clock or calculator, etc.

To active the 2D to 3D conversion function set

the Virtual 3D option in the 3D Settings menu

as On.

The 2D to 3D conversion function is meant

for enjoyment of 2D home video, and other 2D

content you create, in 3D according to your

personal preferences.

Note: The effect you may see depends on Picture content.

The 2D to 3D conversion function is not intended

for use with pre-recorded 2D copyrighted

content owned by a third-party unless the

copyright owner has given direct or indirect

permission, or unless applicable law permits

such use.

About the connecting cable

Use a high-speed and high-quality HDMI

cable when you connect a device such as 3D

compatible BD player or PC to the TV. When

you use a standard HDMI cable, 3D images may

not be shown.

Advertising
This manual is related to the following products: