Toshiba SV685 - Manual (Page 10)

10
CONNECTING YOUR TV
REGZA-LINK connection
You can control the basic functions of connected audio/video devices using the television’s remote control
if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of setup
and operations, see pages 51–52.
For the setup shown above, you will need three HDMI cables
(see page 9).
NOTE:
• If several devices are connected, the REGZA-LINK feature
may not operate properly.
• For proper operation, it is recommended that you use HDMI
cables with the HDMI Logo ( )
• The HDMI 4 terminal is located at the side of the television.
• This function is available with one PC and one AV
amplifier.
This function is available when one PC and one AV
amplifier are connected separately. However, it may not
operate properly if the PC is connected via the AV
amplifier.
Before controlling the device(s):
• After completing the above connections, set the REGZA-
LINK Setup menu as you desire (see page 51).
• The connected devices must also be set. For details, see the
operation manual for each device.
• The REGZA-LINK feature uses CEC technology as regulated
by the HDMI standard.
• This feature is limited to models incorporating Toshiba’s
REGZA-LINK. However, Toshiba is not liable for those
operations. Refer to individual instruction manuals for
compatibility information.
VIDEO AUDIO
L R
R L
OUT
IN
HDMI OUT HDMI IN
HDMI OUT VIDEO AUDIO L R
R L
OUT
IN
HDMI OUT VIDEO AUDIO L R
R L
OUT
IN
AV amplifier
Playback device
Playback device