Startup application, Quick setup – Toshiba SV685 User Manual
Page 14
14
SETTING UP YOUR TV
Startup Application
Before switching on the television, put your
decoder and media recorder, if applicable, to
Standby
.
To set up the television, use the buttons on the
remote control as detailed on page 6.
a
Press the
1
button. The Quick Setup screen will
appear. This screen will appear the first time that the
television is switched on and each time Reset TV is
selected.
b
Highlight Menu Language and press
C
or
c
to select
the menu language.
c
Press
b
to highlight Country and
C
or
c
to select.
The television is now set up to tune the stations for the
selected country.
NOTE:
•The following display menus will differ slightly
according to the country you selected.
•If there is not a country that you want to select in the
list or you want to view DTV programmes but DTV
is not selectable, select Others.
d
Press
Q
, and the Location screen will appear.
e
Press
C
or
c
to select Home or Store. For normal
home use, select Home (skip step 6).
f
Press
Q
. If Store is selected in step 5, the Auto Demo
screen will appear. Press
C
or
c
to select On to use
the demo.
g
Press
Q
. If the Ant/Cable In screen appears, press
C
or
c
to select Antenna or Cable.
h
Press
Q
, and the Auto Tuning start up screen will
appear with the option to select between DTV and
ATV
, DTV or ATV if available. Use
C
or
c
to select
the appropriate mode.
i
Press
b
or
B
to highlight Start Scan, and then press
Q
.
NOTE:
If Cable is selected in step 7, additional setting
options appear in the Auto Tuning screen. See “Ant/
Cable In“ section.
The television will start to search for available DTV
and/or ATV channels. The progress bar will indicate
the scan status.
You must allow the television to complete the
search.
When the search is complete, the television will
automatically select position one.
The Auto Tuning screen will display the total number
of services found.
j
Press
C
or
c
to view the DTV (digital channel) or ATV
(analogue channel) lists.
k
Use
b
or
B
to move through the list to select a
channel, and then press
Q
to view.
In ATV mode, some areas may receive duplicate
stations. There may not be a clear picture or the
signal may be weak, so the station order can be
changed using ATV Manual Tuning.
REMEMBER:
Press ATV/DTV at any time to select
between ATV and DTV (DTV TV/DTV RADIO/DTV
TEXT if available) modes.
NOTE:
The time will be set automatically by
transmission but can be advanced or decreased by
using Local Time Setting in the DTV Settings screen.
Quick Setup
Quick Setup
Country
UK
Primary Subtitle Language
English
English
English
English
Secondary Subtitle Language
Primary Audio Language
Secondary Audio Language
Menu Language
English
Location
Home
To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal
use.
Ant/Cable In
Antenna
Auto Tuning
DTV and ATV
Tuning Mode
Start Scan
Auto Tuning
Progress
Found
ATV Tune
Waiting...
Channel: C7
DTV Tune
3%
2