Toshiba SV685 - Manual (Page 23)

23
CONTROLS AND FEATURES
Surround, Voice Enhancement , and Dynamic Bass Boost
help to create an enhanced surround sound experience with
deep, rich bass from stereo sound sources. Your TV’s audio
will sound fuller, richer, and wider.
a
In the SOUND menu, press b to highlight Advanced
Sound Settings , and then press Q .
b
Press b to highlight Surround, and then press C or
c to select Off, Spatial or Cinema.
c
Press b to highlight Voice Enhancement, and then
press C or c to select On.
d
Press b to highlight Dynamic Bass Boost and using
C or c select the desired bass expansion level (Off,
Low or High).
NOTE: Ext. Woofer is displayed instead of Dynamic Bass
Boost when Woofer is set to External in the AV Connection
menu. See 'Woofer setting' section on page 49.
This feature provides a consistent sound volume regardless of
programmes, channels or input sources.
a
In the SOUND menu, press b to highlight Dolby
Volume .
b
Press C or c to select Low, High or Off.
NOTE:
• The Dolby Volume setting influences the Dynamic Range
Control and Digital Audio Output settings.
• If Dynamic Range Control is set to On, this feature will be
disabled.
This feature allows control of audio compression for some
digital TV programmes (MPEG-1 and MPEG-2 audio
programmes are not supported).
a
In the SOUND menu, press b to highlight Dynamic
Range Control .
b
Press C or c to select On or Off.
NOTE: This feature is disabled when Dolby Volume is set to
Low or High.
Sometimes there can be large changes in volume when
switching from a DTV 5.1ch to a DTV 2ch, an ATV channel,
or an external input. Using the Audio Level Offset feature
reduces these volume differences.
a
Set the volume level usually used when watching a
DTV 5.1ch programme.
b
Tune to a channel which is DTV 2ch or ATV or an
external input.
c
In the SOUND menu, press b to highlight Audio
Level Offset and press Q .
d
Press b to highlight an option, then use C or c to
adjust the volume level.
NOTE:
• The available item changes depending on the current input
source. For example, while watching a DTV 2ch
programme, only DTV 2ch is available and the other two
items are greyed out in the menu. This allows you to easily
adjust according to each condition.
• When watching a DTV 5.1ch programme, this feature is not
available.
This setting is used to set the sound output when headphones
are connected.
a
In the SOUND menu, press b to highlight
Headphone Settings , and then press Q .
b
Press b to highlight Speaker Link and use C or c to
select On or Off.
c
If you select Off, then highlight Headphone Level and
use
C or c to adjust the headphone sound.
Advanced Sound Settings
Dolby Volume ®
Dynamic Range Control
Advanced Sound Settings
Surround
Dynamic Bass Boost
Voice Enhancement On
Off
High
Audio Level Offset
Headphone Settings
Speaker Link Headphone Speakers
On Sound is output
(
2 – + is available.)
No sound
Off Sound is output
(Headphone level
menu is available.) Sound is output
(
2 – + is available.)
0
0
-5
Audio Level Offset
ATV
DTV 2ch
External Input
50
Headphone Settings
Headphone Level
Speaker Link Off