Toshiba SV685 - Manual (Page 20)

20
SETTING UP YOUR TV
Edit the channel number using the number buttons
and press
Q .
If the Auto Channel Update is set to On, when the TV is in
standby mode, Digital Tuning is automatically executed and
any new channels are saved.
a
Select DTV Settings from the SETUP menu and press
Q .
b
Press b to select Auto Channel Update and use C or
c to select On.
This feature allows you to manually set the character set
(Standard = Table 0, West = Table 5 or Latin alphabet 9)
to be used for DVB-C or DVB-T channels.
a
Select DTV Settings from the SETUP menu and press
Q .
b
Press b to select DVB Character Set and use C or c
to select Standard, West or Latin alphabet 9.
If the broadcast information has changed in your DVB-T
receiving area, the TV screen will display the message
“Broadcast information has changed. Would you like to
rescan now? ” please follow the message.
a
Select DTV Settings from the SETUP menu and press
Q .
b
Press b to select Dynamic Scan and use C or c to
select On.
You can select either Home or Store mode. Home is
recommended for normal home use. Select Store when using
the television for displaying in a shop, etc.
a
Select Location from the SETUP menu.
b
Press C or c to select Home or Store.
This is a digital television which is integrated to allow the use
of both digital and analogue services. However, during the
lifetime of this set it is very likely that analogue services will
be switched off to allow for more new digital services.
This ‘switch-off’ will happen in a number of phases, which will
be advertised in your area well in advance. It is
recommended that at each phase the television is re-tuned to
ensure that existing and new digital services can be viewed
without disruption.
Auto Channel Update
DVB Character Set
Dynamic Scan
Pos. Name
ABC ONE
ABC TWO
ABC THREE
CABC Channel
TV Channels
2
1
7
30
ABC NEWS 24 40
ABCi 5 - - -
Location setting
Analogue switch-off