Toshiba Magnia 3030 - Manual (Page 168)

System Configuration Setup
Sensor Data and LCD Setup Tool 150
The following sleep switch operation mode select screen will appear:
Enter “1” to make the sleep switch valid, or “2” to make the switch invalid.
If the entry is accepted properly, “Setting ... OK!” will be displayed.
2 When the message “HIT ANY KEY” is displayed, remove the floppy disk
from the floppy disk drive and then turn off the server.
Changing the number of CPUs
1 Select menu item 4, “Setup CPU FAN Sensor (for MAGNIA3030)”.
2 The mother board sensor information will be updated. Make sure that “Pro-
gramming Complete” is displayed to denote normal completion of process-
ing.
3 When the message “Press any key to continue ...” is displayed, remove the
floppy disk from the floppy disk drive.
4 Restart the system by pressing any key.
TOSHIBA Setup ACPI Program VerX.XX
ACPI = Disable
Change Status?
[1] Enable
[2] Disable
[ESC] Escape
Please Input ([1]-[2] or [ESC])>>
Setting...OK
HIT ANY KEY