Toshiba Magnia 3030 - Manual (Page 183)

Installing Software
Installing the NetWare 5
165
1 Move the cursor to “Storage adapters” on the menu shown above with the
arrow keys, and press the <Enter> key.
2 As the following menu appears, delete “AIC78U2” with the <Del> key.
3 Set the floppy disk labeled “7800 Family Manager Set Novell NetWare
3.1x/Novell NetWare 4.xx” (created by the Toshiba Server Setup Tool) in
the floppy disk drive, and select “Add an unlisted driver <Ins>”0D by press-
ing the <Insert> key twice. 0D
4 Press the <Enter> key to retrieve drivers contained in the floppy disk.
The following drivers are added to the screen.
(The two drivers are added because the Onboard SCSI has two channels.)
5 Proceed with installing operation following the instructions that appear on
the screen.
Selecting the RAID Controller driver
Operate following the procedure mentioned below.
1 Select the Onboard SCSI Controller driver following the procedure of the
previous section “Selecting Onboard SCSI Controller driver”.
2 Delete “AIC78U2” on the same screen as shown in the previous section.
3 Set the floppy disk labeled “MegaRAID Drivers & Utilities for Series XXX
NetWare/MS-DOS” (supplied with RAID Controller) in the floppy disk
drive, and press the <Insert> key to select “Add an unlisted driver <Ins>“.
|| AIC78U2.HAM || ||
|| AIC78U2.HAM || ||
Add, edit, or delete storage drivers. Each controller/adapter
requires a driver.
Driver name Device name Stat
_AUC78U2.HAM _ Adaptec AHA-3950U2B _
_AUC78U2.HAM _ Adaptec AHA-3950U2B _
_IDETA.HAM _ Generic ATA/IDE/ATAPI.Adupter _
_Return to driver summary
_Modify
Additional Driver Options