Toshiba Qosmio G20 (PQG21) - Manual (Page 125)

User’s Manual 7-7
HW Setup
Button Setting
Sound Logo
Use this option to enable or disable the startup sound when the computer is
switched on.
Start Up logo
This option lets you select from the following two types of logo which can be
displayed when the computer starts up.
Configuring the Execute-Disable Bit Capability and
Front Operation Panel
The Execute-Disable Bit Capability and operation of the front panel can
both be configured in the BIOS setup program.
Enabled Enables startup sound (Default)
Disabled Disables startup sound.
Animation The Logo appears as an animated image
(Default).
Picture The Logo appears as a static image.
Notes before using the BIOS Setup
■ In most cases, changes to the system’s configuration should be made
within Windows by using applications such as TOSHIBA HW Setup,
TOSHIBA Password Utility, TOSHIBA Power Saver, Device
Manager and so forth. If you make changes to the configuration
through the BIOS setup program, please be aware that the
configuration set through the Windows applications will take priority.
■ Changes to the settings within the BIOS setup program will not be
erased even if the power supply is switched off and the main battery
removed. However, if the built-in Real Time Clock (RTC) battery runs
out of power, most of the settings will revert back to their default values.
However, please note that the following items will not be affected in this
instance:
• Password
• Hard Disk Drive Password