Toshiba Qosmio G20 (PQG21) - Manual (Page 36)

1-14 User’s Manual
Introduction
TOSHIBA RAID
Console
Use the TOSHIBA RAID Console to create or
manage a RAID array.
To start the utility, click start, point to All
Programs, point to TOSHIBA, point to RAID and
click RAID Console.
It is possible to change to RAID1 (mirroring)
from a non-RAID configuration.
To change to RAID0 (striping), restore your
pre-installed software using the Product
Recovery DVD-ROM. Please refer to Restoring
the Preinstalled Software section in Chapter 3,
Getting Started , for details.
Caution: When RAID0 or RAID1 is set, you
cannot change your setting unless you
completely restore your preinstalled software.
It is strongly recommended to read the TOSHIBA
RAID Help before you change any of the
settings.
TOSHIBA Password
Utility
This utility lets you set a password that restricts
access to the computer.