Toshiba Tecra M9 - Manual (Page 104)

4-24 User’s Manual
M9
Microphone Level
Follow the steps below to change the microphone recording level.
1. Right click on the speaker icon on the taskbar, and select Recording
Devices from the sub menu.
2. Select Microphone, and click Properties.
3. On the Levels tab move the Microphone slider to increase or decrease
the microphone volume level.
If you feel the microphone volume level is inadequate, move the
Microphone Boost slider to a higher level.
PC Beep Level
Follow the steps below to change the PC Beep playback level.
1. Right click on the speaker icon on the taskbar, and select Playback
Devices in the sub menu.
2. Select Speakers, and click Properties.
3. On the Levels tab move the PC Beep slider to increase or decrease the
PC Beep volume level.
Audio Enhancements
In order to apply the sound effects for your current speaker, follow the steps
below.
1. Right click on the speaker icon on the taskbar, and select Playback
Devices from the sub menu.
2. Select Speakers, and click Properties.
3. On the Enhancement tab select the sound effects you would like, and
click Apply.
Realtek HD Audio Manager
The Realtek HD Audio Manager provides you a user interface to change
various audio configuration settings. Some of the Realtek HD Audio
Manager functions can also be accessed via the Sound properties in the
control panel.
The Environment, Equalizer, Karaoke, and Power Management
functions can only be accessed via the Realtek HD Audio Manager.
Environment
You can select 23 kinds of sound effects using the pull down menu in the
Environment pane. Five standard effects, Sweeper Pipe, Bathroom,
Arena, Stone Room, and Auditorium, can be accessed via picture buttons.
Equalizer
You can select 12 kinds of optimized settings for equalization using the pull
down menu in the Equalizer pane. Four standard settings, Pop, Live, Club,
and Rock, can be accessed via buttons.