Maximizing battery operating time, Retaining data with power off, Extending battery life – Toshiba Tecra M9 User Manual

Page 133

Advertising
background image

User’s Manual

6-7

M9

Maximizing battery operating time

A battery’s usefulness depends on how long it can supply power on a
single charge, while how long the charge lasts in a battery depends on:

Processor speed

Screen brightness

System Sleep Mode

System Hibernation Mode

Display power off period

Hard disk drive power off period

How often and for how long you use the hard disk drive and external
disk(c) drives, for example, optical disc and floppy disk drive.

How much charge the battery contained to begin with.

How you use optional devices, such as a PC Cards, to which the
battery supplies power.

Whether you enable Sleep Mode, which can conserve battery power if
you are frequently turning the computer off and on.

Where you store your programs and data.

Whether you close the display panel when you are not using the
keyboard - closing the display saves power.

The environmental temperature - operating time decreases at low
temperatures.

The condition of the battery terminals - you should always ensure the
terminals stay clean by wiping them with a clean dry cloth before
installing the battery pack.

Retaining data with power off

Refer to User´s Manual about Retaining time.

Extending battery life

To maximize the life of your battery packs:

At least once a month, disconnect the computer from a power source
and operate it on battery power until the battery pack fully discharges.
Before doing so, follow the steps as detailed below.

1. Turn off the computer’s power.

2. Disconnect the AC adaptor and turn on the computer’s power - if it

does not turn on then go to Step 4.

3. Operate the computer on battery power for five minutes. If you find

that the battery pack has at least five minutes of operating time,
continue operating until the battery pack is fully discharged,
however, if the Battery indicator flashes or there is some other
warning to indicate a low battery condition, go to Step 4.

Advertising