Toshiba Tecra M9 - Manual (Page 54)

3-12 User’s Manual
M9
Optional devices
Optional devices can expand the computer’s capabilities and its versatility.
This section describes the connection or installation of the following
devices:
Cards/memory
■
PC Card
■
SD/SDHC Card (SD memory card, SDHC memory card)
■
Additional memory module
Peripheral devices
■
Hard disk drive pack
■
Ultra Slim Bay HDD Adaptor
■
USB FDD Kit
■
External monitor
■
i.LINK (IEEE1394)
■
Serial port
■
TOSHIBA Express Port Replicator
Other
■
Security lock
PC Card
The computer is equipped with a single PC Card slot that can accommodate
a Type II format card. Any PC Card that meets industry standards, either
manufactured by TOSHIBA or another vendor, can be installed as the slot
supports 16-bit PC Cards and 32-bit CardBus cards. For reference,
CardBus supports the newer standard of 32-bit PC Cards and provides
superior performance for the greater demands of applications such as
multimedia data transmission.
Inserting a PC Card
The Windows hot-install feature allows you to insert PC Cards while the
computer is turned on.
PC Cards can sometimes become hot during computer operation.
Before you remove a PC Card always wait for it to cool. You could get
burned removing a hot PC Card.
Do not insert a PC Card while the computer is in Sleep Mode or
Hibernation Mode as you may find that some cards do not work properly.