Sharp DK-KP85PH - Manual (Page 17)

E-8
EN
■ About Bluetooth technology
Bluetooth wireless technology is a short-range radio technol-
ogy that enables wireless communication between various
types of digital devices, such as mobile phone or computer. It
operates within a range of about 10 meters (30 feet) without
the hassle of having to use cables to connect these devices.
Since the Bluetooth technology does not require line of sight
between the communicating devices, it is not necessary to
line up the transmitting device and the receiver, as in the case
of infra red technology.
Communication System and
Bluetooth
Profile of this
unit
There are many available Bluetooth Profiles describing the
basic communication methods, specific functions and uses,
to enable communication between devices.
This unit supports the following:
Communication System: Bluetooth Specification version
2.1 Bluetooth + Enhanced Data Rate (EDR) Profile : A2DP
(Advanced Audio Distribution Profile)
A2DP enables audio streaming from an A2DP equipped
Bluetooth stereo audio source device (eg mobile phone)
to this unit. By converting wireless stereo audio signal to
analogue audio signal, you can enjoy listening to the sound
through this speaker system.
AVRCP (Audio/Video Remote Control Profile) is a technology
that allows a single remote control to control all Bluetooth en-
abled Audio Video equipment to which a user has access.
Notes when using unit with a mobile phone
●
This unit cannot be used to talk over the telephone even
when there is a Bluetooth connection made to a mobile
phone.
●
Please refer to the operating manual supplied with the
mobile phone for details on operation of your mobile
phone while transmitting the sound using a Bluetooth
connection.
Audio stream
Bluetooth mobile phone or other
Bluetooth Stereo audio source device
■ Pairing Bluetooth devices
Bluetooth devices need to be initially paired first before they
can exchange data. Once paired, it is not necessary to pair
them again unless:
●
pairing is made with more than 8 devices.
Pairing can only be made one device at a time. This
unit can be paired to a maximum of 8 devices. If subse-
quent device is paired, the oldest device paired, will be
deleted and replaced with the new one.
●
this unit is reset. All pairing information is deleted when
unit is reset.
●
pairing information is deleted while re-pairing, etc.
On indicators
Status PAIRING indicator (blue)
Unconnected Blinks
Pairing mode Blinks quickly
Connected Lights up
Listening to Bluetooth enabled devices