Sharp XE-A137-BK - Manual (Page 40)

38
Manual tax 1 through 4 system (Manual entry method using programmed percentages)
s t
This system provides the tax calculation for taxable 1, taxable 2, taxable 3, and taxable 4 subtotals. This
calculation is performed using the corresponding programmed percentages when the t key is pressed just
after the s key. After this calculation, you must finalize the transaction.
Automatic VAT 1 and tax 2 through 4
This system enables the calculation in the combination with automatic VAT 1 and tax 2 through 4. This
combination can be any of VAT 1 and tax 2 through 4. The tax amount is calculated automatically with the
percentages previously programmed for these taxes.
NOTE
• The tax status of PLU/subdepartment depends on the tax status of the department which the PLU/
subdepartment belongs to.
• VAT/tax assignment symbol can be printed at the fixed right position near the amount on the receipt as
follows:
VAT1/tax1 A
VAT2/tax2 B
VAT3/tax3 C
VAT4/tax4 D
When the multiple VAT/tax is assigned to a department or a PLU, a symbol of the lowest number
assigned to VAT/tax rate will be printed. For programming, please refer to “Various Function Selection
Programming 1” (Job code 66) on page 56.
Example
Key operation Print
$
s
t
A
(When the manual
VAT 1 through 4
system is selected)