Sharp XE-A137-BK - Manual (Page 60)

58
Job code: 68
Item: Selection: Entry:
A Printing data on EJ Z report No 0
Yes* 1
B Always enter 0. 0
C Temporary EJ printing during a transaction Disable 0
Enable* 1
D Always enter 0. 0
E PGM mode operation records type Details* 0
Header information only 1
F REG/VOID modes operation records type Details* 0
Total 1
G Compressing printing for EJ data No (normal size) 0
Yes (small size)* 1
H Action when EJ memory area is full Continue 0
Continue and warning
(with near full warning)*
1
Lock and warning
(with near full warning)
2
Printing data on EJ Z report
• Select “No” to issue an EJ Z report without printing the journal data on it.
Temporary EJ printing during a transaction
• If selecting “enable”, you can print journal data of a current transaction recorded in EJ memory by pressing the
R key during the transaction. To realize this function completely, the cash register must be programmed to
print the receipt and set the Receipt ON/OFF function to OFF.
PGM mode operation records type
• The header information only is recorded during the program reading operation.
The header information only is recorded for X/Z reports.
Action when EJ memory area is full
• By default, when the memory for EJ becomes nearly full, the cash register shows decimal points at the 7th and
8th positions of the display (EJ memory nearly full warning), and the cash register keeps storing new data
while erasing the oldest data. When “0” is selected, the cash register will no longer show EJ memory nearly
full warning. When “2” is selected, the cash register shows EJ memory nearly full warning and when the
memory is totally full, the cash register locks the sales/data entry with a display of the memory full error “
”.
You must issue an EJ report (Z1 report) at this time.