Sharp XE-A137-BK - Manual (Page 66)

64
■
Automatic EURO modification operation settings
@ s A AB
To set “00”
s 12
To program another job code
Item: Selection: Entry:
A Converting the preset unit price of Dept./PLU in the
automatic modification operation for EURO (job #800
in the Z/PGM mode) Yes* 0
No 1
B Automatic modification operation for EURO (job #800
in the Z/PGM mode) at the preset date Compulsory* 0
Non-compulsory 1
Example
Key operation Print
s 12 @
01 s
A
NOTE
If you have already made the Job #800 operation with the substitution of 3 for “A” in the Z/PGM mode,
this programming is disabled.
■
Date setting for EURO modification operation
s A
Date (DD-MM-YY)
(5 or 6 digits)
To set all zeros
@ s 13
To program another job code
Example
Key operation Print
s 13 @
010113 s
A
NOTE
• In case you changed the date format using job code 61, follow the format you selected for setting the
date.
• If all zeros are set, this programming is disabled.
• If you have already made the Job #800 operation with the substitution of 3 for “A” in the Z/PGM mode,
this programming is disabled.