Features, Avoiding interference – Philips Vigilabebés analógico User Manual

Page 9

Advertising
background image

EN

9

Avoiding interference

(channel selection)

Always make sure that the channel selection switches (A-7,
B-10) inside the battery compartments on both units are set to
the same position!

With the channel selection switches (A-7, B-10) you can select
sixteen different channel positions. If you experience
interference from other baby monitors, radio devices, etc. select
a different channel.

1 Open the battery compartment covers (A-8, B-12) of both

units.
• Parent unit: use a screwdriver and slide down the cover.

• Baby unit: use a coin.

2 Lift up the rechargeable battery pack (B-13) of the parent unit.

If you are operating the baby unit on battery power, remove
the batteries from the unit.

3 Use a small, flat screwdriver to rotate the inner circle of the

channel selection switches (A-7, B-10) to the desired position.
Make sure both units are set to the same channel.

4 Put batteries and battery pack back in place.

5 Close the battery compartment covers (A-8, B-12).

Features

Advertising
This manual is related to the following products: