Brother LK3-B448E - Manual (Page 20)

LK3-B448E MARK II /BA-16
13
3. Installation
3-13. Installing the shooter
3-12. Installing the button feeder
1. Move button feeder base
q
to the front and rear and
left and right as necessary to install it by using hole
bolts
w , spring washers e and washers r .
(And install ground wires ty .)
To vibrating bowl
To control box
(For vibrating bowl)
1. Raise the shooter lock pin
w
on the vibrating bowl
q
,
and secure the shooter
e
by inserting the pin
w
,
through the notch in the shooter.
2. Secure the shooter
e
with thumb screw
r
on button
feeder t .