Brother LK3-B448E - Manual (Page 5)

iv
LK3-B448E MARK II /BA-16
c Warning labels
★ The following warning labels appear on the sewing machine.
Please follow the instructions on the labels at all times when using the machine. If the labels have been
removed or are difficult to read, please contact your nearest Brother dealer.
1
2
Safety devices:
q Belt cover,
w
Thread take-up cover,
e
Eye guard,
r
Motor cover,
t Thread take-up solenoid cover, etc.
Moving parts
may cause injury.
Operate with safety devices.
Turn off main switch before
threading, changing bobbin
and needle, cleaning etc.
CAUTION
Be sure to connect the ground.
If the ground connection is not secure,
you run the risk of receiving a serious
electric shock.
Direction of operation
3
4
4
3
1
2
1
q
r
e
w
t
Hazardous voltage
will cause injury.
Turn off main
switch and wait 5
minutes before
opening this cover.
Un voltage non adapt
provoque des blessures.
Eteindrel’interrupteur et
attendre 5 minutes
avantd’ ouvrir le capot
Hochspannung
verletzungsgefahr!
Bitte schalten sie den
hauptschalter aus und
warten sie 5 minuten,
bevor sie diese
abdeckung ffnen. Un voltaje inadecuado
puede provocar las
heridas.
Apagar el interruptor
principal y esperar 5
minutos antes de abrir
esta cubierta.