Brother LK3-B448E - Manual (Page 31)

LK3-B448E MARK II /BA-16
24
5. Operation
5 . Operation
5-1 . Name and function of each operation panel item
S E L E C T
PROGRAM NO.
R E S E T
COUNTER
X-SCALE
Y-SCALE
SPEED
P
T E S T
BOBBIN.WIND
P4 P3
P1 P2
POWER
q
w
r
e
t
y
u
i
o
!0
!1
!4
q POWER indicator ................... Illuminates when the power switch has been turned on.
w
RESET switch ........................ Press this switch to reset the machine when an error occurs.
e
TEST switch ........................... Use this switch when you want to operate only the feed mechanism in order to
check a pattern.
r
TEST indicator ....................... Illuminates when the TEST switch has been pressed.
t BOBBIN. WIND switch ........... Press this switch to wind the lower thread.
y
SELECT switch ......................
PROGRAM NO. indicator u →
X-SCALE indicator i →
Y-SCALE indicator o →
SPEED indicator !0 →
COUNTER indicator !1
u PROGRAM NO. indicator ....... Illuminates when the SELECT switch y is pressed to shown the program
number setting.
Use this switch to select a menu (program number, X and Y feed, speed and
counter). Each time the switch is pressed, one of the menu indicators (
u to !1 )
illuminates, and the setting for that menu item appears in the display
!4
.The illumi-
nated indicator changes as follows each time the switch is pressed.