Brother LK3-B448E - Manual (Page 30)

LK3-B448E MARK 2 /BA-16
23
4. Lubrication
4-2. Applying grease
Do not apply too much grease in the place indicated by
the arrow. If too much grease is applied here, the button
clamp may not move up and down smoothly and error
[E-6 ] may appear on the display.
4-3. Draining the oil
1. Remove and empty the waste oil container
q
whenever
it is full.
2. After emptying the waste oil container q , screw it back
into its original position.
q