Brother LK3-B448E - Manual (Page 34)

27
LK3-B448E MARK II /BA-16
5. Operation
AUTO 1
AUTO 2
OFF
BA-1 6
q
w
5-3. Operating the button feeder
1. Button feeder switch q
AUTO1 ... Buttons are supplied automatically after
sewing is complete.
AUTO2 ... When sewing is complete and the button
clamp releases its button, the next button
is supplied.
OFF ........ Buttons are not supplied automatically.
2. Trouble indicator
w
(1) When buttons are being fed to the button clamp,
the trouble indicator
w
will be OFF.
(2) When the trouble indicator
w
is flashing, buttons
are not supplied to the button clamp.
(3) If the trouble indicator w is on, a problem has
occurred. See below.
3. Manual switch
e
Press to feed a button.
w
q
e
5-4. Operating the vibrating bowl
1. Turn the power switch on.
2. Turn the switch
q
in the control box on.
3. Turn the adjustment knob
w
.
Turn the knob right to increase and left to decrease
the amount of vibration of the vibrating bowl.