4 lens installation, Lens installation, Installation guidelines – Barco ULTRA REALITY 7000 User Manual
Page 14
2. Installation Guidelines
Lenses
Metric Formulas (meter)
Inch Formulas (inch)
QGD(0.8:1) / SW: (1-1.4)m
PD = 0,775 x SW — 0,048 + 0,0074 /
SW
PD = 0.775 x SW — 1.89 + 11.47 / SW
QGD(0.8:1) / SW: (1.7-2.4)m
PD = 0,775 x SW — 0,048 + 0,0072 /
SW
PD = 0.775 x SW — 1.89 + 11.47 / SW
QGD(0.86:1)
PD = 0,8376 x SW + 0,00254 — 0,0150
/ SW
PD = 0.8376 x SW + 0.1 — 23.25 / SW
Lens program to calculate the projector distance is available on the BARCO web site :
http://www.barco.com/projection_systems/customer_services/lens_program.asp
2.4.4
Lens installation
How to install ?
Follow the next procedure :
1. Open the lens cover of the projector by pivoting it up and take it off. (image 2-3)
2. Pull the lens locks levers backwards to open the lens locks. (image 2-4)
3. Put the lens on the lens holder. (image 2-5)
4. Push the lens locks back in position and lock the levers.
5. Plug the wires of the motor unit into the connector (image 2-6)
6. Re-install the lens cover.
Image 2-3
Image 2-4
Image 2-5
Image 2-6
10
R5976455 BARCO ULTRA REALITY 7000 30062003