Barco ULTRA REALITY 7000 - Manual (Page 87)

12. Installation menu
Image 12-10
How to program the quick access keys ?
1. Scroll through the menus to the desired menu item
2. Push the desired function key for 3 seconds
The menu item is stored in the quick access key
12.6 RS232 baudrate
How to change the baudrate?
1. Press MENU to activate the Toolbar
2. Press → to select the Installation item
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select RS232 baudrate
5. Press → to pull down the menu (image 12-11)
6. Use ↓ or ↑ to select the desired baudrate
7. Press ENTER
Image 12-11
12.7 Network configuration
DHCP
Dynamic host configuration protocol
R5976455 BARCO ULTRA REALITY 7000 30062003 83