Barco ULTRA REALITY 7000 - Manual (Page 54)

7. Image Menu
How to select a preset color temperature ?
1. Press MENU to activate the Toolbar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select Color temperature
5. Press → to pull down the menu
6. Use ↓ or ↑ to select the desired preset color temperature
7. Press ENTER
The color temperature of the image is adapted and a white bullet shows the active setting. (image 7-11)
Image 7-11
How to start up the custom color temperature ?
1. Press MENU to activate the Toolbar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select Color temperature
5. Press → to pull down the menu
6. Use ↓ or ↑ to select custom
7. Press ENTER
A sliderbox for the red custom setting is displayed as well as a wizard textbox in the lower part of the screen. (image 7-12)
Follow the instructions on the wizard textbox. (image 7-13)
Image 7-12
Image 7-13
7.7 Filmmode detection
What can be done ?
Some sources like common DVD material are derived from cinema 24 Hz sources (2/2 or 3/2 pull down method).
50 R5976455 BARCO ULTRA REALITY 7000 30062003