Barco ULTRA REALITY 7000 - Manual (Page 45)

6. General Menu
How to set the lamp runtime warning?
1. Press MENU to activate the Toolbar
2. Press → to select the General item
3. Press ↓ to Pull down the General menu
4. Use ↑ or ↓ to select Runtime warning (image 6-15)
5. Press ENTER
A dialogbox is displayed (image 6-16)
6. Use ←or →, the numeric keys on the remote, or the keypad to change the runtime warning setting.
Image 6-15
Image 6-16
Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized technician.
6.10 Lamp Dimming
What can be done?
The lamp can be dimmed via the lamp dimming feature.
Start Up
1. Press MENU to activate the Toolbar
2. Press → to select the Lamp item
3. Press ↓ to Pull down the Lamp menu (image 6-17)
4. Use ↑ or ↓ to select Dimming
5. Press ENTER
A dialogbox is displayed
Select the desired lamp power (image 6-18)
R5976455 BARCO ULTRA REALITY 7000 30062003 41