Philips PerfectDraft Tireuse à bière domestique - Manual (Page 15)

Step European (except Germany
and UK)
German British
b. Close the tap and put the
glass down for 1 minute to
allow the foam to settle.
c. Repeat steps 2 to 6 and fill
the glass up to the rim.
8 Close the tap in one
smooth movement.
Close the tap in one
smooth movement.
Close the tap in one
smooth movement.
9 a. Move the glass away from
the spout to prevent drops
of beer from falling onto the
foam head.
Move the glass away from
the spout to prevent drops
of beer from falling onto the
foam head.
Move the glass away
from the spout to
prevent drops of beer
from falling onto the
foam head.
b. Remove the foam that rises
beyond the rim of the glass
by passing a skimmer over the
rim of the glass at an angle
of 45°.
10 Your beer is now ready to be
served.
Your beer is now ready to
be served.
Your beer is now
ready to beserved.
replacing the keg
The keg is empty when only foam comes out of the spout and no beer.
The display also indicates that the keg is empty.
1 Press the release button to the right to open the doors.
Make sure you open the doors fully.
2 Lift the blue locking levers completely.
EnglisH 15
4222.001.9361.3.indd 15 08-02-10 10:52