Philips PerfectDraft Tireuse à bière domestique - Manual (Page 17)

cleaning
Clean the appliance when you replace the keg or when you store the
appliance for a longer period.
Never use scouring pads, scouring agents or aggressive liquids such as
petrol or acetone to clean the appliance.
1 Always unplug the appliance before you clean it.
2 Clean the outside of the appliance with a damp cloth.
3 Remove the spout.
4 Remove and disassemble the drip tray and the drip tray cover.
5 You can remove the tap handle by pulling it out of the tap body.
6 Clean the tap unit, the drip tray and the drip tray cover with hot
water and, if necessary, some washing-up liquid.
Hot water may cause burns. Always check if the water is not too hot
before you clean these parts under the tap.
, Only the drip tray, the drip tray cover and the spout are dishwasher-
proof.
Environment
, Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment.
Disposal of the cooling element
, The cooling element inside the appliance contains a substance
that may pollute the environment. Therefore you must remove
the cooling element before you discard the appliance.
You can also take or send the appliance to a Philips service centre. The staff
of this centre will remove the cooling element for you and will dispose of it
in an environmentally safe way.
Only remove the cooling element when you discard the appliance!
EnglisH 17
4222.001.9361.3.indd 17 08-02-10 10:52