Philips AVENT Écoute-bébé DECT - Manual (Page 9)

9
5.3 Paging the parent unit
If you have lost the parent unit, you can use
the FIND button on the baby unit to locate
the parent unit.
D Note:
The paging function only works when the
parent unit is switched on.
1
Press the FIND button on the baby unit.
• The message ‘PAGING’ appears on the
display of the parent unit and the parent
unit produces a paging alert tone.
2
To stop the paging alert tone, press the
FIND button on the baby unit again or
press any button on the parent unit.
D Note:
The paging alert tone stops automatically
after 2 minutes.
• The selected lullaby repeats for 15 minutes.
• If no lullaby was selected before, lullaby 1
is played.
2
Press the next lullaby button to select
another lullaby from the list.
• If no lullaby is playing, the last selected
lullaby starts playing when you press the
next lullaby button .
• When you press the next lullaby button
while a lullaby is playing, the next lullaby
starts playing.
3
To adjust the sound level of the lullaby, press
the volume + or the volume – button on the
baby unit.
D Note:
You can only set the loudspeaker volume on the
baby unit when a lullaby is playing. If you have
set the volume for the lullaby higher on the baby
unit, the sound will also be louder when you
use the talk function on the parent unit.
4
To stop lullaby playing, press the lullaby
play/stop button K on the baby unit.
EN
g
LIS
h