BlueAnt Bluetooth SUPERTOOTH II - Manual (Page 19)

d. MAKING A CALL with the Handsfree Kit on
Normal dialing
With your Imate you can make a call using different methods. Please refer to your PC
Phone’s User Guide.
The most direct method is by using the Phone keypad.
1. Press button to bring up the dialer screen.
2.
Tap the number on the keypad, and then tap Talk key.
Note: Audio will be heard directly on the Handsfree Kit. At times, for first time dialing,
audio will be heard on the phone and not immediately on the Handsfree Kit. If this is the
case you have to press once on the Send Button to transfer the audio to the Kit.
3.
To terminate the call, press down the Pick-Up/Hang-Up Button.
e.
AUDIO TRANSFER DURING A CALL
1. Audio Transfer back to the Imate can be done by accessing the phone’s
Bluetooth Headset icon.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button.
f.
REJECTING A CALL
Rejecting a call must be done by selecting IGNORE on the phone or by pressing the Reject
Button on the Supertooth II
g. SETTING THE VOLUME
Setting the volume can be done using the Volume Control.
1.
Turn it clockwise to increase the volume.
2. Decrease the volume by turning it counter-clockwise.
Note: If the volume is too high, it can cause feedback (whistling sound), echo or background
noise during calls on some cell phones.
Useful Information for Imate Pocket Pc
After pairing the Supertooth please make sure headphones are enabled on your Imate.
Tap Start....Settings... Today....Items and tick Profile. (make sure profile is ticked).
This creates a link so you can enable or disable the Supertooth. You will see a small headphone
symbol on the main screen allowing you to connect or disconnect from the Supertooth quickly...
Note: The Imate Pocket Pc can only use one audio device, set as the default.
To use a second paired device with this phone, rename it and set it as the default.
19