BlueAnt Bluetooth SUPERTOOTH II - Manual (Page 57)

e. AUDIO TRANSFER
Audio Transfer can be done by accessing the cell phone’s Menu during ongoing calls.
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit). This
will automatically transfer the audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button.
The audio will be transferred from the phone to the kit.
f. REJECTING A CALL
Press the Reject Button to reject the incoming call.
g. RECONNECTING
After coming into range or turning SuperTooth back on, Press the Pick-Up/Hang-Up key on the
SuperTooth once to Reconnect.
h. SETTING THE VOLUME
Setting the volume can be done using the Volume Control.
1.
Turn it clockwise to increase the volume.
2. Decrease the volume by turning it counter-clockwise.
Note: If the volume set is too high, it can cause feedback (whistling sound), echo or
background noise during calls on some cell phones.
f.
BlUETOOTH TIME OUT
To conserve battery power you can set Bluetooth to switch off after a certain time period.
1. Press to display Main Menu.
2. Highlight Settings, and then press to select.
3. Select Connectivity, Bluetooth, Bluetooth Settings, Bluetooth Time Out and select
desired setting. The default is No Time Out
57