BlueAnt Bluetooth SUPERTOOTH II - Manual (Page 59)

2. A beep will then be heard on the Handsfree Kit prompting the user to say the name
of the person to call.
3. Say the name. The name will be played back to you. The phone will then place the
call automatically. In case the cellular phone does not recognize the name spoken,
the steps above may be repeated.
4. Press the Pick-Up/Hang-Up Button to terminate the call.
Redialing
Make a long press on the Pick-Up/Hang-Up Button. It will trigger the cell phone to redial
the last number. Audio will be heard on the Handsfree Kit.
e. AUDIO TRANSFER
Audio Transfer can be done by accessing the cell phone’s Menu during ongoing calls.
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit).
This will automatically transfer the audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit).
Then press shortly the Pick-Up/Hang-Up Button. The audio will be
transferred from the phone to the kit.
f. REJECTING A CALL
Press the Reject Button to reject an incoming call.
g. SETTING THE VOLUME
Setting the volume can be done during calls only.
1.
Turn it clockwise to increase the volume.
2. Decrease the volume by turning it counter-clockwise.
Note: If the volume is too high, it can cause feedback (whistling sound), echo or background
noise during calls.
h. RECORDING FOR VOICE DIALING
Use your phone when recording for voice dialing. Record your contact names and numbers in
the “Address book” (phone memory).
1.
From standby mode, open the Address book by pressing the arrow down key .
(If Phonebook is the one displayed, press key to switch to Address book.)
2. Select a contact name then press Options.
3. Scroll to Voice dialing, SELECT. New, SELECT. Recording for: contact name,YES.
Follow the instructions. Your voice will automatically be saved on the phone after being
played back to you.
4. In case you wish to change your recorded voice, press Options button. Voice tags,
SELECT. Change, SELECT. Instructions appear.
5. Press On/Off/End key to exit.
Note: Noisy environment may affect voice recognition.
Record your voice in a quiet place.
59