BlueAnt Bluetooth SUPERTOOTH II - Manual (Page 37)

d. ANSWERING/RECEIVING A CALL
When the phone is receiving a call, a ring tone will be heard on the Handsfree Kit as well as on
the phone.
1. Press the Pick-Up/Hang-Up Button once to answer the call.
2. End the call by pressing the Pick-Up/Hang-Up Button.
Note: Cell phone buttons can also be used to answer a call but audio will still be heard on the
Handsfree Kit.
e. MAKING A CALL with the Handsfree Kit on
Normal dialing
1. Enter the contact number and send. As you dial, audio and the keypad tones can
be heard on the Handsfree Kit simultaneously but not on the phone.
2. Press the Pick-Up/Hang-Up Button to terminate the call.
Note: If the call is terminated using the cellular phone, a tone will be heard on the
Handsfree Kit indicating that the call has been terminated.
Voice dialing
Refer to step j for the procedure when recording for voice dialing.
1. Press
the Pick-Up/Hang-Up Button once to activate the voice dialing.
2. A beep will then be heard on the Handsfree Kit prompting the user to say the name
of the person to call.
3. Say the name. The name will be played back to you. The phone will then place the
call automatically. In case the cellular phone does not recognize the name spoken,
the steps above may be repeated.
4. Press the button again to terminate the call.
Redialing
Make a long press on the Pick-Up/Hang-Up Button to redial the last number.
f. AUDIO
TRANSFER
Audio Transfer can be done by accessing the cell phone’s Menu during ongoing calls.
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically transfer
the audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button. The audio will be transferred
from the phone to the kit.
g. REJECTING A CALL
Press the Reject Button to reject the incoming call
h. RECONNECTING SUPERTOOTH (only for some Nokia phones, others auto-connect)
After coming into range or turning SuperTooth back on, Press the Pick-Up/Hang-Up key on
the SuperTooth once to Reconnect.
37