BlueAnt Bluetooth SUPERTOOTH II - Manual (Page 42)

Note: Audio will be heard directly on the Handsfree Kit. At times, for first time dialing,
audio will be heard on the phone and not immediately on the Handsfree Kit. If this is the
case you have to press once on the Send Button to transfer the audio to the Kit.
2.
To terminate the call, press down the Pick-Up/Hang-Up Button.
d.
AUDIO TRANSFER DURING A CALL
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically
transfer the audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button. The audio will be transferred
from the phone to the kit.
e. REJECTING
A CALL
Rejecting a call must be done on the phone.
f.
SETTING THE VOLUME
Setting the volume can be done using the Volume Control.
1.
Turn it clockwise to increase the volume.
2. Decrease the volume by turning it counter-clockwise.
Note: If the volume is too high, it can cause feedback (whistling sound), echo or background
noise during calls on some cell phones.
42