BlueAnt Bluetooth SUPERTOOTH II - Manual (Page 30)

MOTOROLA V3 / V80 / V525 / V535 / V600 / V620 / E398
a. ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection
between your mobile phone and other Bluetooth devices.
1. Press
Menu key featured as or press on the center button of the 5-Way
NavigationKey featured as to access Menu. Scroll to Settings, SELECT. Choose
Connection, SELECT. Bluetooth Link, SELECT.
2. Scroll to Setup, Select. Scrool to Power, Select. Choose ON
3. Continue pressing Back, to exit.
b.
PAIRING TO THE CELLULAR PHONE (not possible during charg ng) i
1. Bring the cellular phone at about 20 cm from the Handsfree Kit.
2. The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
3. Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change
from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree
Pairing Mode.
4. Press Menu key or press the center button of the 5-Way Navigation key to
access Menu. Scroll to Settings, SELECT. Choose Connection, SELECT. Bluetooth
Link, SELECT.
5. Choose Handsfree, SELECT. [Look for devices], SELECT. The phone will then scan the
device to be added.
6. On the scan results, choose the Supertooth, SELECT.
A question “Bond with … (device name)?” appears. Press YES.
7. Enter Bluetooth passkey “0000” then press ok. If pairing is successful, a remark
“Connected to…” appears. The phone exits automatically.
The Handsfree Kit is paired and ready to use.
c. ANSWERING/RECEIVING A CALL
When the phone is receiving a call, a ring tone will be heard on the Handsfree Kit.
1. Just press once on the Pick-Up/Hang-Up Button to answer the call.
2. If you wish to answer the call on your cellular phone, just press the Menu key
of the phone. On the Call Menu, scroll down to Use Handset, SELECT. Audio will
be heard on the phone. Pressing back on the Pick-Up/Hang-Up Button of your
Supertooth will transfer the audio back to it.
3. To terminate the call, press the Pick-Up/Hang-Up Button.
d.
MAKING A CALL with the Handsfree Kit on
Normal dialing
1. Enter the contact number and press SEND/ANS key. Audio can be heard on the
Supertooth.
2. To terminate a call, press the Pick-Up/Hang-Up Button.
30