Palm treo 650 – BlueAnt Bluetooth SUPERTOOTH II User Manual
Page 51
PALM TREO 650
Note: Please make sure you have the latest firmware upgrade for your phone. Go to the
support section of the following website to check you have the latest version. You will need to
register your device to download updates.
For Treo 650 go
a.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your phone to establish a Bluetooth connection
between your Pocket PC device and other Bluetooth devices.
1. Press the Home Button to bring up the main menu.
2. Tap the Bluetooth icon
2. Tap On.
b.
PAIRING TO THE CELLULAR PHONE (not possible while charging)
14. Bring your phone to within about 20 cm from the Supertooth.
15. The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm(1) to the 55º
position. The Bluetooth Indicator(9) will glow (blue blink).
16. Simultaneously
press
the
Reject Button(2) and the Pick-Up/Hang-Up Button(7) for
about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will
change from blinking blue to alternate blinking red and blue. SuperTooth II is now in
Handsfree Pairing Mode.
17. On your phone Tap the Bluetooth icon at the top of the screen.
18. Tap
Setup Devices. Tap Hands-free Setup. Tap Next.
19. For Show Devices, Select All known devices
20. Your phone now searches for Bluetooth devices and will display them in the list.
21. Tap the name of the device, Supertooth, and then Tap OK.
22. Enter “0000” as the PassKey and then tap Done.
23. Tap
Done to complete the process.
The Supertooth is paired with your Treo 650. An enabled Bluetooth icon will be seen on screen
indicating that the Supertooth is linked.
c.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, two dissimilar ring tones will be heard from the phone and
then from the Supertooth.
4.
When answering is done on the Supertooth (that is, pressing Pick-Up/Hang-Up
once), audio will be heard on it.
5.
When answering is done on the phone, ongoing call will be heard on the phone
(not on the Supertooth). But if you wish to hear and transfer the audio to the
Supertooth, just press the Pick-Up/Hang-Up button once on the Supertooth.
6.
To terminate the call, press down the Hang-Up Button.
d.
MAKING A CALL
Normal dialing
With your Phone you can make a call using different methods.
Please refer to your PC Phone’s User Guide.
51