BlueAnt Bluetooth SUPERTOOTH II - Manual (Page 56)

SHARP GX30/GX32/GX15/GX25
a.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection
between your mobile phone and other Bluetooth devices.
1. Press
to display Main Menu.
2. Highlight Settings, and then press to select.
3. Select Connectivity, Bluetooth, Bluetooth On/Off and Select On.
4. Continue pressing Back then finally Exit.
The Bluetooth setting is activated. Bluetooth icon is displayed on standby mode screen.
b. PAIRING TO THE CELLULAR PHONE (not possible while charging the Handsfree Kit)
1. Bring the cellular phone at about 20 cm from the Handsfree Kit.
2. The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
3. Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for
about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will
change from blinking blue to alternate blinking red and blue. SuperTooth II is now in
Handsfree Pairing Mode.
3.
Press Joystick to display Main Menu.
4. Highlight Settings, and then press to select.
5. Select Connectivity, Bluetooth and Search for Devices.
Note: The phone displays three categories: “Headset”, “Car kit”, and “All”. If you select
“All”, the phone lists devices from all categories.
The phone now searches for Bluetooth devices to be paired. When the search is
complete, devices found in the selected category are listed.
6. Highlight the desired device for pairing, and then press to select.
7. Enter “0000” as the passcode then press ok.
8. Continue pressing Back then finally Exit.
The Handsfree Kit is paired and ready to use.
c. ANSWERING/RECEIVING A CALL
When the phone is receiving a call, a tone will be heard on the Handsfree Kit.
1. Press once on the Pick-Up/Hang-Up Button to answer a call.
2. End the call by pressing the Pick-Up/Hang-Up Button.
Note: Cell phone buttons can also be used to answer a call but audio will still be heard on the
Handsfree Kit.
d. MAKING A CALL with the Handsfree Kit on
Normal dialing
1. Using your phone, enter the contact number and press Send key on the phone.
Audio will be heard on the Handsfree Kit.
2. Press the Pick-Up/Hang-Up Button to terminate the call.
Redialing
Make a long press on the Pick-Up/Hang-Up Button to redial the last number.
56